[1] RAJ U, WANG Faming. A three-dimensional conjugate heat transfer model for thermal protective clothing[J]. International Journal of Thermal Sciences, 2018, 130: 28-46. [2] SONG Guowen, PASKALUK S, SATI R, et al. Thermal protective performance of protective clothing used for low radiant heat protection[J]. Textile Research Journal, 2011, 81(3): 311-323. [3] 朱方龙, 张渭源. 基于人体皮肤热模型的热防护服评价方法研究[J]. 中国安全科学学报, 2007, 17(11):134-140. ZHU Fanglong, ZHANG Weiyuan. Study on estimation of thermal protective clothing based on human skin heat transfer model[J]. China Safety Science Journal, 2007,17(11):134-140. [4] 翟胜男,陈太球,蒋春燕,等.含水率对防护织物热防护性能的影响[J].中国安全科学学报, 2018, 28(7): 148-152. ZHAI Shengnan, CHEN Taiqiu, JIANG Chunyan, et al. Effect of moisture of firefighter fabric on its thermal protective performance[J]. China Safety Science Journal, 2018, 28(7): 148-152. [5] MANDAL S, SONG Guowen. Characterizing thermal protective fabrics of firefighters' clothing in hot surface contact[J]. Journal of Industrial Textiles, 2018, 47(5): 622-639. [6] 李晓琳,于伟东.耐高温表层材料选择及层合后隔热性对比分析[J].中国安全科学学报, 2019, 29(4): 127-132. LI Xiaolin, YU Weidong. Selection of surface materials for high temperature insulation and comparative analysis of heat insulation performance after lamination[J]. China Safety Science Journal, 2019, 29(4): 127-132. [7] MANDAL S, SONG Guowen, ACKERMAN M, et al. Characterization of textile fabrics under various thermal exposures[J]. Textile Research Journal, 2013, 83(10): 1 005-1 019. [8] ASTM F1060-2018, Standard test method for thermal protective performance of materials for protective clothing for hot surface contact[S]. [9] 闫飞, 陆大年. 织物整理用相变微胶囊的制备[J]. 印染助剂, 2011, 28(1): 32-34. YAN Fei, LU Danian. Preparation of phase change micro-capsules for textile finishing[J]. Textile Auxiliaries, 2011, 28(1): 32-34. [10] 王永凤, 周学梅, 魏文政, 等. 相变涂层的控温性能研究[J]. 表面技术, 2013, 42(1): 113-115. WANG Yongfeng, ZHOU Xuemei, WEI Wenzheng, et al. Research on temperature control performance of phase change coating[J]. Surface Technology, 2013, 42(1): 113-115. [11] FONSECA A, MAYOR T S, CAMPOS J B L M. Guidelines for the specification of a PCM layer in firefighting protective clothing ensembles[J]. Applied Thermal Engineering, 2018, 133: 81-96. [12] BUHLER M, POPA A M, SCHERER L, et al. Heat protection by different phase change materials[J]. Applied Thermal Engineering, 2013, 54(2): 359-364. [13] ROSSI R M, BOLLI W P. Phase change materials for the improvement of heat protection[J]. Advanced Engineering Materials, 2005, 7(5): 368-373. [14] SHAID A, WANG L, PADHYE R. The thermal protection and comfort properties of aerogel and PCM-coated fabric for firefighter garment[J]. Journal of Industrial Textiles, 2016, 45(4): 611-625. [15] 查思思. 相变材料在消防服用织物中的应用研究[D]. 上海:东华大学, 2013. ZHA Sisi. Performance of firefighter-clothing fabrics with phase change materials[D]. Shanghai:Donghua University, 2013. [16] 徐哲, 李建强. 液体石蜡相变微胶囊的制备及性能表征[J]. 过程工程学报, 2012, 12(2): 293-301. XU Zhe, LI Jianqiang. Preparation and characterization of microencapsulated phase change liquid paraffin[J]. The Chinese Journal of Process Engineering, 2012, 12(2): 293-301. [17] GB/T 3923.1—2013, 纺织品 织物拉伸性能 第1部分:断裂强力和断裂伸长率的测定(条样法)[S]. GB/T 3923.1-2013, Textiles—tensile properties of fabrics—part 1:determination of maximum force and elongation at maximum force using the strip method[S]. [18] PENNES H H. Analysis of tissue and arterial blood temperatures in the resting human forearm[J]. Journal of Applied Physiology, 1998, 85(1): 5-34. |